Hot Products
0102030405
China Low Temperature Heat Pump Crystallizer V-CT-SF-10000 - 440 L/h Evaporative Power from Trusted Suppliers and Factory
01. Vacuum Evaporation
Low temperature heat pump evaporator under the vacuum negative pressure to reduce the boiling point to a certain extent, so that the original liquid after heating in more than 30 degrees and then boiling evaporation, evaporation of steam through the condensation system condensed into liquid water through the drainage tank discharge, and then according to the specific gravity of the water concentration reduction water rate can reach 95%.
02. Thermal Cycle Technology
The heat pump evaporator uses steam recompression or refrigeration heat pump technology to achieve thermal cycle and balance, this energy-saving technology compared with electric heating, can introduce 80% of the electrical energy, which is based on the principles of physics, the same amount of material from the liquid into the gas process, the need for quantitative absorption of heat energy.
03. Energy Recovery
The material can be changed from gaseous to liquid, and can release the same amount of heat energy. Using this principle, when the device is used to treat waste water, the heat energy required for evaporating waste water is released after steam condensation and condensate cooling.
Lower temperature, lower energy consumption and waste.
Lower scaling, easier cleaning and maintenance.
Integrated design, lower occupation, Plug & Play.
Easier installation and less time.
Forced circulation evaporation crystallizer adopts forced circulation process for evaporating crystallization of materials. When evaporating crystallization, the forced circulation pump is used for evaporating crystallization, and the heated or cooled materials re-enter the crystallization chamber, so the cycle is continuous, which belongs to the slurry circulation type. It can be operated continuously or intermittently.
The forced circulation of the evaporative crystallizer, whose internal structure enables the effective and rapid separation of the crystal and the clear liquid. The whole process is evaporation under vacuum conditions, the temperature is relatively low, the evaporation speed is fast, the evaporation energy consumption is low, and the evaporation concentration is high.
Frequently Asked Questions
How does the low temperature heat pump evaporator achieve water reduction?
It operates under vacuum negative pressure to lower the boiling point. This allows the original liquid to boil and evaporate at temperatures above 30 degrees. The steam then condenses into liquid water, achieving up to a 95% water concentration reduction rate.
What makes this heat pump evaporator highly energy-efficient?
The system utilizes steam recompression or refrigeration heat pump technology to manage the thermal cycle. Compared to traditional electric heating, this physics-based energy-saving technology can reduce electrical energy input requirements by up to 80%.
What are the main installation and maintenance benefits of the system?
The system features an integrated Plug & Play design that occupies less space and ensures easier, faster installation. Additionally, it offers lower scaling tendencies, making cleaning and routine maintenance much simpler.
How does a forced circulation evaporation crystallizer operate?
It uses a forced circulation pump to continuously cycle heated or cooled materials back into the crystallization chamber. This slurry circulation process can be run either continuously or intermittently depending on operational needs.
Why is evaporation under vacuum conditions beneficial for crystallization?
Evaporating under vacuum conditions keeps processing temperatures relatively low. This structural design enables fast evaporation speeds, low energy consumption, high concentration levels, and rapid separation of crystals from the clear liquid.