Low Temperature Atmospheric Pressure Evaporator V-CT-SF-3000 - 125 L/h | China Suppliers & Factory
Why choose industrial wastewater low temperature evaporator? This is because the use of industrial wastewater low-temperature evaporator, plus energy only electric energy, under the conditions of negative pressure and low temperature, to achieve the boiling evaporation of waste liquid, after cooling by the cold skeptic can be used as water or separated from the water in the form of crystallization.
Dissolved solids are extracted from water in the form of crystallization to prevent the accumulation of dissolved solids in wastewater system software and reuse system software, thus providing possible conditions for realizing zero discharge of industrial wastewater.
The operation and maintenance cost of low temperature and low pressure evaporation and concentration process is lower than that of traditional multi-effect evaporation process. Low temperature evaporation and concentration technology is a new technology for industrial wastewater treatment, which has been applied in practical engineering, and the effect is good, which basically meets the purpose and requirements of process design.
Supporting facilities: only industrial power supply, equipment valves are electric valves.
Therefore, more and more enterprises choose low-temperature evaporator to achieve hazardous waste reduction and reduce enterprise operating costs.
Advantages of low temperature atmospheric pressure evaporator:
-
(1) Industrial low-temperature wastewater evaporator, which greatly reduces energy consumption;
-
(2) The whole process only uses electricity, low energy consumption;
-
(3) The whole process of low temperature evaporation of the evaporation equipment, the maximum temperature of the system is about 55℃, there will be no high temperature related accidents;
-
(4) The evaporation process is a non-boiling process under atmospheric pressure, which requires low air tightness and makes the system safe and reliable;
-
(5) The heat pump host system heat exchanger is titanium, the host life is the whole life cycle, no maintenance, no consumables;
-
(6) The system operation noise is low, the maximum noise is only the sound of the pump operation.
Frequently Asked Questions (FAQ)
Why should we choose a low-temperature evaporator for industrial wastewater?
An industrial low-temperature evaporator only requires electricity to operate. Under negative pressure and low temperature conditions, it boils and evaporates waste liquid. The evaporated water is then cooled and can be reused, or separated in the form of crystallization to achieve zero liquid discharge.
How does low-temperature evaporation help achieve zero discharge?
By extracting dissolved solids from water in the form of crystallization, the system prevents these solids from building up in the wastewater and reuse system software, making zero discharge of industrial wastewater achievable.
What are the operational and maintenance advantages of this process?
The operation and maintenance costs of low-temperature and low-pressure evaporation and concentration processes are significantly lower than those of traditional multi-effect evaporation. Additionally, the heat pump host heat exchanger is made of titanium, requiring no maintenance and no consumables over its entire life cycle.
What supporting facilities are required for installation?
The system has minimal installation requirements, needing only an industrial power supply. All equipment valves are electric valves, simplifying setup and operation.
Is the low-temperature atmospheric pressure evaporator safe to operate?
Yes, the system is highly safe and reliable. The maximum temperature of the system is only about 55℃, which eliminates high-temperature hazards. Furthermore, the evaporation process occurs under atmospheric pressure and is non-boiling, requiring low air tightness.