Low Temperature Evaporation V-HP-SF-10000: 440 L/h Evaporative Power - Reliable China Suppliers & Factory

This step is automatic. After the original bucket reaches the medium level, the pump runs to produce vacuum, the evaporator automatically enters water, and the compressor runs to generate heat to heat the wastewater in the evaporation tank. In the vacuum state, the wastewater temperature rises to about 30℃, and the wastewater begins to evaporate, and the preheating is completed.

The evaporation temperature is set at 35-40℃, the compressor compresses the refrigerant to generate heat, and the water evaporates rapidly at the same time, the refrigerant absorbs heat and refrigeration after gasification through the expansion valve, and the vapor rises and liquefied into the cold liquid into the water storage tank. The refrigerant absorbs heat, and then compresses and heats the waste water. If bubbles rise during the evaporation process, the sensor detects that the defoamer is automatically added to the defoamer, and after a cycle is completed, the concentrated liquid is discharged (the time of a cycle can be set).

After the completion of an evaporation cycle, the compression pump stops working, the concentrate pipeline pneumatic valve is opened, the evaporation tank is pressurized, and the concentration hydraulic pressure is put into the concentration barrel.

Atomized liquids to achieve maximum evaporation efficiency.